Epoxy Flake Floors
Shop and garage floors that take tractors, tools and spilled fluids. The flake texture hides caliche dust tracked in from the drive.
Dripping SpringsEpoxy
Epoxy floors for Hill Country shops, barns and garages.
About Dripping Springs Epoxy
Out here a slab is not just a garage floor. It might be the floor of your shop, your barndominium living room, or a covered patio where the family eats half the year.
We grind and test every slab before we coat it, because a lot of slabs in new steel buildings were poured fast and never sealed. Getting that right is the difference between a floor that lasts and one that peels in a year.
Floors we put down in Dripping Springs
Metallic Epoxy
A high-gloss, one-of-a-kind floor for tasting rooms, studios and finished shops that double as entertaining space.
Concrete Staining
Acid and water-based stain is the classic barndominium floor. The color goes into the concrete, so it will not chip or peel like paint.
Stamped Concrete
Patios and walkways with a flagstone look that fits limestone homes, without the weeds and shifting you get with loose pavers.
Pick your flake blend
Real Signature blend chips, the same ones we bring to your estimate. Tap one to see it up close.
From the shop floor to the living room
What to expect
We come to you
Even out past the paved roads. We measure and test the slab on site.
Clear price
Your written quote lists the prep, primer, coating and topcoat.
Grind & install
Dust-controlled grinding, then the coating system goes down.
Final look
We walk the floor with you and go over care and cure times.
Why slabs out here need extra prep
A lot of Dripping Springs builds are on acreage, with steel shops and barndominiums poured on site. Those slabs often have curing compound, sealer or rough trowel marks that a coating will not stick to unless it is ground off first.
We also check moisture before we coat. Slabs on rural lots without a good vapor barrier can push moisture up from below, and we add a moisture-blocking primer when the test calls for it.
Neighborhoods we cover
- Headwaters
- Caliterra
- Belterra
- Founders Ridge
- Highpointe
- Big Sky Ranch
Also Driftwood, Wimberley, Bee Cave, Austin, Henly
Common questions
Can you coat a brand-new barndominium slab?
Yes, once it has cured. New concrete needs roughly 28 days before coating. We will test it and tell you if it is ready.
Stain or epoxy for a barndo living area?
Stain gives a natural, mottled look that ages well. Metallic epoxy gives a glossy, modern look. We bring samples of both so you can see them on your slab.
Do you travel to rural properties?
We cover Dripping Springs and the surrounding ranch roads. If you are not sure you are in range, call and ask.
How long until I can use my shop floor?
Most coating jobs take one to three days to install. You can walk on it sooner than you can drive on it, and we give you exact times for your system.
Tell us about your slab
Shop, garage, barndominium or patio. Send the details and we will set up a time to come out.